Guide

EICR software for sole-trader electricians: what actually matters for a one-person firm

What a one-person electrical firm needs from EICR software: minutes saved per report, a PDF the landlord can open on their phone, an invoice that goes out the same evening and gets paid, and a price with nothing added. How Certio handles each, and where it still falls short.

Published 17 November 2026 · Updated 17 November 2026 · Certio Software Ltd

Most EICR software is sold on feature lists written for firms with an office. A one-person firm has a different test: does it give me my evening back? You inspect and test during the day, and then the report, the invoice and the chasing eat the night. This guide sets out what matters when you are the inspector, the admin and the accounts department, how Certio handles each part, and where it still falls short, so you can judge it against anything else you are looking at.

Key takeaways
  • Minutes are the measure. A 12-way board is 20 to 40 minutes of typing after the job; software that drafts the schedule from a photo and reads the tester gives most of that back.
  • The landlord wants a PDF they can forward from their phone, on the A4:2026 model forms, with your details on it.
  • The invoice should come from the same job, with a card link and chasing, or you will do it at 9 pm, or not at all.
  • Pay for what one person uses: a flat monthly price with nothing added, no per-user fee, no contract.
  • Nothing replaces you. The inspection, the codes, the limitations and the signature are yours whatever app you use.

What matters when you are the whole firm

Time per report

The inspection and testing take what they take. What software changes is everything after the last reading: writing up the circuit details, typing the results, checking each Zs against the right limit, composing the observations, producing the PDF. On a typical domestic board that is 20 to 40 minutes of desk time, and it is the part that gets pushed to the evening.

Certio drafts most of the circuit-details columns of the schedule from a photo of the consumer unit: it reads the way labels, the device standard, curve letter and amp rating, and the RCD rated residual operating current off the board, and it never invents an amp rating; it then adds typical cable sizes and, on a domestic board, 6 kA and 30 mA as clearly flagged assumptions for you to confirm or change. The reference method and the number of points served are yours to enter. On the Starter and Pro plans you select a result cell, point the camera at the Megger MFT-X1 screen and the reading goes in; the Bluetooth link to the MFT-X1 is there too, in beta. The grid fills the maximum Zs from Chapter 41 for the device you confirmed and flags a reading that exceeds it. Observation wording with the regulation reference is suggested for you to edit and confirm. The report is usually finished before you leave the property. How to Fill In a Schedule of Test Results shows column by column where the typing goes.

Getting the report to the landlord

A landlord or letting agent does not want an app login. They want a PDF on their phone that they can forward to the tenant and, if asked, to the council. In England the Electrical Safety Standards in the Private Rented Sector Regulations 2020 require the landlord to give a copy to the tenant within 28 days and to the local authority within seven days of a request, and Landlord EICR Regulations in England sets out the rest.

Certio produces the finished EICR as a PDF laid out to the BS 7671:2018+A4:2026 model forms, with your logo and business details on the paid plans and a small Certio mark on the Free plan. From the phone, the share sheet sends it by WhatsApp, email or AirDrop; from the web portal you download it. Issued certificates stay on your account and are exportable, so the copy you keep for your records is the same file the landlord has.

Getting paid

This is where certificate-only apps leave a sole trader on their own. The invoice is a separate app, so it gets raised later, chased never, and paid late. On Certio Pro the invoice is raised from the job the certificate belongs to, with a pay-by-card link, automatic chasing when it falls due, and receipts for your costs. When you subcontract to a contractor, CIS deductions and the construction reverse charge are handled on the invoice; CIS and the Reverse Charge on Electrician Invoices explains both. You can also hold the certificate until the invoice is paid, which is the single most effective late-payment tool a sole trader has, and Electrician Invoicing and Quoting Basics covers the terms that go with it.

The diary and the next job

A one-person firm lives in the diary. Certio's jobs, customers and bookings are on every plan, including Free, so the EICR you booked, the address, the customer and the certificate are one record. Quotes, on Pro, can be priced from a drawing, and RAMS for a commercial job are a few minutes rather than an evening.

Paying for what one person uses

Software priced per user, before tax, with tokens on top, is priced for an office. Certio is priced per business: Free £0 with no card and no time limit, Starter £4.99 a month, Pro £9.99 a month, with nothing added at checkout and no contract. Cheapest Electrical Certificate App UK puts those prices next to what the alternatives published on 17 November 2026.

A sole trader's EICR day with Certio

Step Without software, or with a form-filler With Certio
Before the job Print blank forms or open a blank template; copy the customer details Open the booking; the customer, address and previous certificate are already there
At the board Write the ways and device details by hand Photograph the board; confirm the drafted ways and the flagged assumptions
Testing Write 30 readings on paper Select the cell, read the MFT-X1 screen by camera, or press Save over Bluetooth (beta)
Observations Compose at the desk from memory Suggested wording with the regulation reference, edited on site
Issue Type everything up, make the PDF, email it Sign on the phone; the PDF is made; share by WhatsApp or email before you leave
Invoice Separate app, later Raised from the job on Pro, card link attached, chased automatically
Records Folders of PDFs Every certificate and invoice against the customer, exportable

Where Certio still falls short

Honesty is cheaper than a refund. Certio does not yet have EV charger or solar PV certificates; if those are weekly work for you, iCertifi or EasyCert cover them and Best EICR app UK 2026 compares all six options. The Bluetooth link to the MFT-X1 is in beta and the camera read is the reliable route; both were built and tested on the MFT-X1, so other testers' displays may read by camera but are untested, and the MFT-X1 guide says exactly what the link does and does not do. The AI allowance on Starter is sized for a solo electrician's boards; if you are scanning several boards a day, Pro's allowance is much larger. And nothing here inspects, tests or codes for you.

Which plan for a sole trader?

  • Just starting out, or a few certificates a month: Free. Full certificates, a small Certio mark on the PDF, no card.
  • Mostly certificates, and you want the evening back: Starter at £4.99 a month. Your logo, the board scan, the tester reads.
  • You quote, invoice and chase as well as test: Pro at £9.99 a month. Everything in Starter plus quotes, invoicing with CIS and the reverse charge, pay-by-card links, chasing, receipts, RAMS and the certificate held until you are paid.

Download Certio Certs on the App Store Get it on Google Play Get Starter · £4.99/mo

How Certio helps

Certio produces the EICR, EIC, Minor Works certificate and PAT records on the BS 7671 model forms and turns them into branded PDFs. Photograph the consumer unit and the circuit schedule drafts itself; point the phone camera at a Megger MFT-X1 and the reading goes straight into the schedule of test results. Suggested observation wording with the regulation reference is there for you to check and confirm. The judgement stays yours; the typing goes. Starter is £4.99 a month, charged when you sign up.

Straight answers

Questions

What should a sole-trader electrician look for in EICR software?
Four things. Time: how many minutes it takes off each report, which comes down to whether it drafts the schedule from a board photo and gets tester readings in without typing. Delivery: a branded PDF on the A4:2026 model forms that a landlord or agent can open on a phone. Money: an invoice from the same job, with a pay-by-card link and chasing, and CIS and the reverse charge handled when you subcontract. Price: a flat monthly figure with nothing added, no per-user fee you will never use, and no contract.
How much time does EICR software save on a report?
On a typical 12-way domestic board, typing the circuit details and 30 or so results by hand takes 20 to 40 minutes at the desk after the job. With a board photo drafting most of the circuit-details columns and the tester readings read in by camera or Bluetooth, most of that goes, and the report is finished on site. The inspection and testing time does not change; the evening does.
How do I send an EICR to a landlord?
As a PDF. In Certio the finished report is a PDF with your logo and details, and the share sheet sends it by WhatsApp, email or AirDrop from the phone, or you download it from the web portal. Landlords in England must give the report to tenants within 28 days and to the local authority within seven days of a request, so a PDF they can forward from their phone is what they want.
Can I invoice from the same app as the certificate?
On Certio Pro, yes. The invoice is raised from the job the certificate belongs to, with a pay-by-card link, automatic chasing, CIS deductions and the construction reverse charge when you are subcontracting, and receipts for your costs. You can also hold the certificate until the invoice is paid. The Free and Starter plans do certificates, customers, jobs and the diary without invoicing.
What does Certio cost a sole trader?
Free is £0 with no card and no time limit: full certificates with a small Certio mark on the PDF and no AI. Starter is £4.99 a month and adds your logo plus the board scan and tester reads. Pro is £9.99 a month and adds quotes, invoicing, pay-by-card links, chasing, receipts and RAMS. Nothing is added at checkout, there is no contract, and you can cancel any time.
What can Certio not do for a sole trader yet?
It does not have EV charger or solar PV certificates, so if those are a weekly job you need another app for them. The Bluetooth link to the Megger MFT-X1 is in beta, and the camera read is the reliable route. It reads the MFT-X1 only over Bluetooth, not other brands. And it does the typing, not the inspection: the codes, the limitations and the signature are still yours.
Less typing, same judgement

Down tools at 5. The paperwork's already done.

Certio lays out EICR, EIC, Minor Works and PAT certificates to the BS 7671 model forms and produces branded PDFs. Photograph the board and the schedule drafts itself; point the camera at a Megger MFT-X1 and the reading goes straight in. There's a free plan with no card. Starter is £4.99 a month and Pro £9.99 with unlimited certificates, charged when you sign up.

Get Starter · £4.99/mo →

More on EICR software and AI EICR software.